Time Delay Relays- Single Shot

R62 Series

Features

  • 16 Time Ranges in Single Timer (0.1 sec. to 120 min.)
  • User Sets Time Ranges No Math − Just Flip Switches
  • Instructions Right on Unit
  • Fine Tuning Knob for Precision Timing
  • Pin for Pin Interchangeable with Timers in the Field − No Rewiring
  • AC or DC Operation
  • CMOS Digital Circuitry − 0.5% Repeatable Accuracy

Electrical Specifications

Contact
Rating: 10 Amps 240VAC or less, 1/3 HP, 240VAC or 120VAC
Pilot Duty 345VA, 120VAC or 240VAC, 50/60HZ
Life: 500,000 operations at full load
Mechanical Life: 7,000,000 operations at no load
Input
Nominal Input voltage: 12V, 24V, or 120V
Steady state input current: 17mA, 83mA, 167mA
Timing
Timing adjustment modes available: See Timing Range Chartr60-timing
Repeat Accuracy
± 0.5% − after established at steady temperature (4 hours)
Timing tolerance at high end of range: −0, +10%
Timing tolerance at low end of range: +0, −50%
Reset Time: 60 mS typ
Protection
Transient: surge test 10,000V for 20 mS
Dielectric Breakdown Coil To Contact: 1850 VAC
Across Open Contact: 1850 VAC
Environmental Characteristics
Operating: −20°C to +55°C
Weight
Std: 4.5 oz (130 grams) approx.

SKUImageDescriptionPrice
R62-11AD10-12R62_01RELAY-DPDT PROGRAMMABLE TIME DELAY 10AMP 12AC/DC SINGLE SHOT 11-PIN OCTAL BASE 16 TIME RANGES$125.19Add to cart
R62-11AD10-120R62_01RELAY-DPDT PROGRAMMABLE TIME DELAY 10AMP 120AC/DC SINGLE SHOT 11-PIN OCTAL BASE 16 TIME RANGES$126.00Add to cart
R62-11AD10-24R62_01RELAY-DPDT PROGRAMMABLE TIME DELAY 10AMP 24AC/DC SINGLE SHOT 11-PIN OCTAL BASE 16 TIME RANGES$124.26Add to cart
R95-104R95-104SOCKET-11 PIN OCTAL 300V 10AMP WITH PRESSURE CLAMP SCREWS$11.50Add to cart
R95-114R95-114SOCKET 11-PIN OCTAL PANEL/SURFACE MOUNT DIN RAIL MOUNTABLE PRESSURE CLAMP SCREWS$6.46Add to cart
R95-119R95-119SOCKET 11-PIN OCTAL PANEL MOUNT SOLDER TERMINALS 300V 10AMP$2.94Add to cart
R95-182R95-182SOCKET-3PDT 11-PIN OCTAL DIN RAIL MOUNT FINGER SAFE 300V 10 AMP$8.37Add to cart