Special Function Devices

R66 / RLY300 Series

Features:

  • For Duplex Loads
  • Transient Protection
  • LED Indicates Output Relay Status
  • Compact 8-Pin Octal Plug-In Case
Mode of Operation: Alternating
Contact Arrangement: SPDT, DPDT (Cross-Wired)
Contact Ratings: 10A @ 30VDC/240VAC
Input Voltage: 120, 240VAC
Response Time:
Dimensions: H x W x L 2.900 (73.0) x 2.400 (60.96) x 1.770 (44.95)

Electrical Specifications
Contact
Rating: 10 Amps resistive at 240VAC, 1/2 HP at 240VAC, 10 Amps resistive at 30VDC
Life: 500,000 operations at full load
Mechanical Life: 7,000,000 operations at no load
Operational Characteristics
Voltage Tolerances: +10%, −15% at 50/60Hz
Power Required: 3VA
Protection
Transient: 10,000V for 20µs
Indicator LED: 2 LED’s marked LOAD A and LOAD B
Environmental Characteristics
Operating: −28°C to +65°C

SKUImageDescriptionPrice

R67 Series

Features:

  • Monitors AC Single Phase and DC Voltages
  • Wide Range of User-Adjustable Pick-Up and Drop-Out Settings
  • LED Indicates Output Relay Status
  • Compact 8-Pin Octal Plug-In Case
Mode of Operation: Voltage Monitoring
Contact Arrangement: DPDT
Contact Ratings: 10A @ 30VDC/240VAC
Input Voltage: 24, 240VAC/24VDC
Response Time: 50ms (Operate), 50ms (Release)
Dimensions: H x W x L 2.900 (73.0) x 2.400 (60.96) x 1.770 (44.95)

Electrical Specifications
Contact
Rating: 10 Amps resistive at 240VAC, 1/2 HP at 240VAC, 10 Amps resistive at 30VDC
Life: 500,000 operations at full load
Mechanical Life: 7,000,000 operations at no load
Operational Characteristics
Voltage Settings:
Pick−up: Adjustable from 85−115% of nom
Drop−out: Fixed at 3% below pick−up setting
Setting Accuracy: +0%, −5% min; +5%, −0% max
Timing Values:
Operate Time: 50 mS
Release Time: 50 mS
Power Required: 3VA
Protection
Transient: 10,000V for 20 s
Indicator LED: Red LED on when relay is energized
Reset: Automatic
Environmental Characteristics
Operating: −28 C to +65 C

SKUImageDescriptionPrice
R67-11A10-120R67_01RELAY VOLTAGE MONITORING DPDT 120VAC 10A 8-PIN OCTAL BASE LED INDICATES OUTPUT RELAY STATUS$117.19Add to cart
R67-11A10-24R67_01RELAY VOLTAGE MONITORING DPDT 24VAC 10A 8-PIN OCTAL BASE LED INDICATES OUTPUT RELAY STATUS$112.84Add to cart
R67-11D10-24R67_01RELAY VOLTAGE MONITORING DPDT 24VDC 10A 8-PIN OCTAL BASE LED INDICATES OUTPUT RELAY STATUS$117.67Add to cart
R95-101R95-101SOCKET-8 PIN OCTAL 300V 15A WITH PRESSURE CLAMP SCREWS$5.40Add to cart
R95-113R95-113SOCKET 8-PIN OCTAL PANEL OR SURFACE MOUNT DIN RAILMOUNTABLE PRESSURE CLAMP SCREWS$4.06Add to cart
R95-118R95-118SOCKET 8-PIN OCTAL PANEL MOUNT SOLDER TERMINALS 300V 10AMP$2.94Add to cart

R68 Series

Features:

  • Protection Against Phase Loss, Phase Reversal, Phase Unbalanced, and Undervolatge
  • User Selectable Phase Unbalance and Overvoltage Settings
  • User Adjustable Time Delay Drop-Out on Undervoltage
  • LED Indicates Output Relay Status
  • Compatible with Wye or Delta Systems
  • Compact 8-Pin Octal Plug-In Case
Mode of Operation: Phase Monitoring
Contact Arrangement: SPDT
Contact Ratings: 10A @ 30VDC/240VAC
Input Voltage: 208 – 240VAC
Response Time: 1-30sec Adj (Restart)
100ms Fixed (D/O Phase Loss)
2sec Fixed (D/O Phase Unbalanced)
0.1-20sec Adj (D/O Undervoltage)
Dimensions: H x W x L 2.900 (73.0) x 2.400 (60.96) x 1.770 (44.95)

Electrical Specifications
Contact
Rating: 10 Amps resistive at 240VAC/30VDC, 1/2 HP at 120/240VAC
Life: 100,000 operations at full load
Mechanical Life: 10,000,000 operations at no load
Input
Nominal Input voltage: 208−480VAC
Steady state input current: 50mA Max.
Operational Characteristics
Response Times:
Power Up: . . 2 sec. fixed
Restart After Fault: 1−300 sec. adjustable
Drop−Out Due Fault:
Phase Loss & Reversal: 100ms fixed
Phase Unbalanced: 2 sec. fixed
Undervoltage: 0.1 − 20 sec. adjustable
Overvoltage: Fixed Time Based on Inverse Time Curve
Hysteresis: 2 − 3%
Load (Burden): Less than 3VA
Protection
Indicator LED: See LED Status table
Reset: Automatic upon correction of fault. When a N.C. switch is wired across the manual reset terminals (Pin5 & Pin6), the unit switches to manual reset mode and remote manual reset is available.
Environmental Characteristics
Operating: −28°C to +65°C

SKUImageDescriptionPrice
R68-5A10-480R68_01RELAY PHASE MONITORING SPDT 208-480VAC 10A 8-PIN OCTAL BASE LED INDICATES NORMAL AND FAULT CONDITION$145.45Add to cart
R95-101R95-101SOCKET-8 PIN OCTAL 300V 15A WITH PRESSURE CLAMP SCREWS$5.40Add to cart
R95-113R95-113SOCKET 8-PIN OCTAL PANEL OR SURFACE MOUNT DIN RAILMOUNTABLE PRESSURE CLAMP SCREWS$4.06Add to cart
R95-118R95-118SOCKET 8-PIN OCTAL PANEL MOUNT SOLDER TERMINALS 300V 10AMP$2.94Add to cart