Time Delay Relays- Repeat Cycle

R26 Series

Features

  • 16 Time Ranges in Single Timer (0.6 sec. to 24 hrs.)
  • User Sets Time Ranges No Math − Just Flip Switches
  • Instructions Right on Unit
  • Fine Tuning Knob for Precision Timing
  • Pin for Pin Interchangeable with Timers in the Field − No Rewiring
  • AC or DC Operation
  • CMOS Digital Circuitry − 0.5% Repeatable Accuracy

Electrical Specifications

Contact
Rating: 10 Amps 240VAC or less, 1/3 HP, 240VAC or 120VAC
Pilot Duty 345VA, 120VAC or 240VAC, 50/60HZ
Life: 500,000 operations at full load
Mechanical Life: 7,000,000 operations at no load
Input
Nominal Input voltage: 12V, 24V, or 120V
Steady state input current: 17mA, 83mA, 167mA
Timing
Timing adjustment modes available: See Timing Range Chartr26
Repeat Accuracy
± 0.5% − after established at steady temperature (4 hours)
Timing tolerance at high end of range: −0, +10%
Timing tolerance at low end of range: +0, −50%
Reset Time: 60 mS typ
Protection
Transient: surge test 10,000V for 20 mS
Dielectric Breakdown Coil To Contact: 1850 VAC
Across Open Contact: 1850 VAC
Environmental Characteristics
Operating: −20°C to +55°C
Weight
Std: 4.5 oz (130 grams) approx.

SKUImageDescriptionPrice
R26-11AD10-12R26_01RELAY-PROGRAMMABLE REPEAT CYCLE TIME DELAY DPDT 10AMP 12V AC OR DC 8-PIN OCTAL PLUG-IN OFF …$131.79Add to cart
R26-11AD10-120R26_01RELAY-PROGRAMMABLE REPEAT CYCLE TIME DELAY DPDT 10AMP 120V AC OR DC 8-PIN OCTAL PLUG-IN OFF …$145.72Add to cart
R26-11AD10-24R26_01RELAY-PROGRAMMABLE REPEAT CYCLE TIME DELAY DPDT 10AMP 24V AC OR DC 8-PIN OCTAL PLUG-IN OFF …$122.80Add to cart
R95-101R95-101SOCKET-8 PIN OCTAL 300V 15A WITH PRESSURE CLAMP SCREWS$5.40Add to cart
R95-113R95-113SOCKET 8-PIN OCTAL PANEL OR SURFACE MOUNT DIN RAILMOUNTABLE PRESSURE CLAMP SCREWS$4.06Add to cart
R95-118R95-118SOCKET 8-PIN OCTAL PANEL MOUNT SOLDER TERMINALS 300V 10AMP$2.94Add to cart
R95-181R95-181SOCKET-DPDT 8-PIN OCTAL DIN RAIL MOUNT FINGER SAFE 300V 10 AMP$9.39Add to cart

R27 Series

Features

  • 16 Time Ranges in Single Timer (0.6 sec. to 24 hrs.)
  • User Sets Time Ranges No Math − Just Flip Switches
  • Instructions Right on Unit
  • Fine Tuning Knob for Precision Timing
  • Pin for Pin Interchangeable with Timers in the Field − No Rewiring
  • AC or DC Operation
  • CMOS Digital Circuitry − 0.5% Repeatable Accuracy

Electrical Specifications

Contact
Rating: 10 Amps 240VAC or less, 1/3 HP, 240VAC or 120VAC
Pilot Duty 345VA, 120VAC or 240VAC, 50/60HZ
Life: 500,000 operations at full load
Mechanical Life: 7,000,000 operations at no load
Input
Nominal Input voltage: 12V, 24V, or 120V
Steady state input current: 17mA, 83mA, 167mA
Timing
Timing adjustment modes available: See Timing Range Chartr26
Repeat Accuracy
± 0.5% − after established at steady temperature (4 hours)
Timing tolerance at high end of range: −0, +10%
Timing tolerance at low end of range: +0, −50%
Reset Time: 60 mS typ
Protection
Transient: surge test 10,000V for 20 mS
Dielectric Breakdown Coil To Contact: 1850 VAC
Across Open Contact: 1850 VAC
Environmental Characteristics
Operating: −20°C to +55°C
Weight
Std: 4.5 oz (130 grams) approx.

SKUImageDescriptionPrice
R27-11AD10-12R27_01RELAY-PROGRAMMABLE REPEAT CYCLE TIME DELAY DPDT 10AMP 12V AC OR DC 8-PIN OCTAL PLUG-IN ON …$128.39Add to cart
R27-11AD10-120R27_01RELAY-PROGRAMMABLE REPEAT CYCLE TIME DELAY DPDT 10AMP 120V AC OR DC 8-PIN OCTAL PLUG-IN ON …$145.78Add to cart
R27-11AD10-24R27_01RELAY-PROGRAMMABLE REPEAT CYCLE TIME DELAY DPDT 10AMP 24V AC OR DC 8-PIN OCTAL PLUG-IN ON …$141.31Add to cart
R95-101R95-101SOCKET-8 PIN OCTAL 300V 15A WITH PRESSURE CLAMP SCREWS$5.40Add to cart
R95-113R95-113SOCKET 8-PIN OCTAL PANEL OR SURFACE MOUNT DIN RAILMOUNTABLE PRESSURE CLAMP SCREWS$4.06Add to cart
R95-118R95-118SOCKET 8-PIN OCTAL PANEL MOUNT SOLDER TERMINALS 300V 10AMP$2.94Add to cart
R95-181R95-181SOCKET-DPDT 8-PIN OCTAL DIN RAIL MOUNT FINGER SAFE 300V 10 AMP$9.39Add to cart

R38 Series

Features

  • ± 0.1% Repeatability
  • 8−Pin Octal Plug−In
  • Knob with Calibrated Scales
  • Impact Proof Dust Cover
  • 2−Timing Ranges
  • IC Hybrid Circuitry for Timing

Electrical Specifications

Contact
Rating: 10 Amp @ 120 VAC, 8 Amp @ 30 VDC 1/3 HP @ 120 VAC 1/2 @ 240 VAC
Life: 500,000 operations @ 120 VAC, 10A resistive 1,000,000 operations @ 120 VAC, 5A resistive 2,000,000 operations @ 120 VAC, 2A resistive
Input
Nominal Input voltage: 120 VAC
Steady state input current: 20mA @ 120 VAC
Timing
Timing adjustment ranges available: On (T1) Off (T2) 0.1 to 10 sec 0.1 to 10 sec (K−suffix) 3 to 300 sec 3 to 300 sec (L−suffix)
Repeat Accuracy
± 0.1% ±33 mS AC
Percent Timing change over temperature & voltage range: ± 10%
Reset Time: 100 mS max
Protection
Transient: UL 508 surge test, 5000V for 50 mS
Dielectric Breakdown Coil To Contact: 1500 VAC
Across Open Contact: 1000 VAC
Environmental Characteristics
Operating: −10°C to +55°C
Storage: −55°C to +85°C
Weight
Std: 5 oz (132 grams) approx

SKUImageDescriptionPrice
R38-11A10-120KR38_01RELAY-TIME DELAY DPDT REPEAT CYCLE TIMER 10AMP 120VAC 8-PIN OCTAL BASE 0.1-10 SECOND TIMING RANGE$126.61Add to cart
R38-11A10-120LR38_01RELAY-TIME DELAY DPDT REPEAT CYCLE TIMER 10AMP 120VAC 8-PIN OCTAL BASE 3.0-300 SECOND TIMING RANGE$122.58Add to cart
R95-101R95-101SOCKET-8 PIN OCTAL 300V 15A WITH PRESSURE CLAMP SCREWS$5.40Add to cart
R95-113R95-113SOCKET 8-PIN OCTAL PANEL OR SURFACE MOUNT DIN RAILMOUNTABLE PRESSURE CLAMP SCREWS$4.06Add to cart
R95-118R95-118SOCKET 8-PIN OCTAL PANEL MOUNT SOLDER TERMINALS 300V 10AMP$2.94Add to cart
R95-181R95-181SOCKET-DPDT 8-PIN OCTAL DIN RAIL MOUNT FINGER SAFE 300V 10 AMP$9.39Add to cart