Transition Boot with Lip

transitionbootwl-diagram

For added physical retention from slippage during service.

Lipped transition boots used in conjunction with a circular, grooved adapter.  The rib is located in the outside diameter groove provided on typical backshells.

This product is designed to meet the requirements of DOD-2003-1.  All materials conform to SAE-AS81765/1.

Features:

  • Superior crush resistance ideally suited for shipboard and communications cabling
  • Build-up or shim cable diameters for a better fit for components in cable harnesses
  • Very robust – used for strain relief and fire resistant mechanical protection
  • Low temperature flexibility – can be installed on connector body, rear thread or plain cable shaft
  • Heat resistant – no dripping, flowing or cracking at 225°C (ASTM D-2671)
Part
Number
A
Min. +/- 20%
B
Min. Exp.
B
Max. Rec.
C
Min. Exp.
C
Max. Rec.
D
Min. +/- 10%
E
Min. +/- 10%
F
Min. +/- 20%
G
Min. +/- 20%
MIL
C-5015
Rotating
MIL
C-26482
Solid
MIL
C-26482
Rotating
432L111.500.970.380.970.210.360.860.050.04--8
NUCS425A1.500.970.490.970.210.360.860.070.068S, 10S8-
NUCS424A40.970.380.970.212.700.860.070.068S, 10S8-
NUCS424AVG40.970.380.970.212.700.680.070.068S, 10S8
4765473.51.075.0430.261.000.600.070.07
432L122.161.120.561.120.260.511.100.060.0410SL, 12S810
432L132.631.220.701.220.290.701.400.070.0414S1012, 14
432L142.901.420.841.420.340.631.630.07.06516S, 16, 1812, 1416, 18
432L153.901.681.071.680.370.712.470.08.06520, 2216, 1820
432L165.132.041.362.040.631.502.560.13.06524, 2620, 22, 2422, 24